Everything you need to learn about IIoT


The Internet of things (IoT) describes the network of physical objects—a.k.a. "things"—that are embedded with sensors, software, and other technologies for the purpose of connecting and exchanging data with other devices and systems over the Internet - Wikipedia

Since 2016, I am working on Siemens S7-1200, OPC UA, IIoT gateway and MQTT tools aggressively to develop software platform for various Mechatronic systems. Considering the fact that it is hard to find the information all together at one place, I created four courses which sums up the knowledge to learn IIoT. In this combo, you will learn about the following:

  • How to make flows in Node-RED to make customize program
  • How to interface Node-RED with your favorite controller- Arduino, Raspberry pi or PLC
  • How to build connection and create Visual dashboard for the following controller:
  • PLC - Delta 12SE, Siemens S7-1200, PLCnext, Siemens Logo or any other PLC which supports MODBUS TCP/IP or OPC UA
  • Arduino or Raspberry pi
  • IIoT Device- Weintek
  • SoftPLC i.e. FACTORY I/O
  • How to interface the controller via OPC UA
  • How to build OPC UA layer to the controller which does not have OPC UA server inside to interact this controller with other devices
  • What is OPC UA and how to save the controller data in MySQL database using simple flows
  • How to connect to MySQL database located in Google server
  • How to make your own mini IIoT or edge device using Raspberry pi
  • What is MQTT and how to connect the IIoT device to PLC like Siemens S7-1200 via MQTT
  • How to visualize and control edge device via smart devices
  • How to interface the IIoT device to Smart home devices
  • How to send the controller information to the IBM cloud via edge device

All the above lessons are divided into four courses to make the flow of learning easy and abstract. This is an amazing wonderful opportunity to grab all the four amazing courses for lifetime at reduced price which sums up your IIoT journey under one platform. This combo will give you access to the following courses:

  1. Node-RED made Easy (49€)
  2. Learn OPC UA with Node-RED (39€)
  3. Interface MySQL with PLC via Node-RED (49€)
  4. Learn MQTT with Node-RED (49€)

Including 1 on 1 LIVE Session with Instructor:

Learning is best when you have the instructor support. Although you will get lifetime community support in our private community but along with this bundle you will get 60 minutes 1 on 1 LIVE session with the instructor i.e. Rajvir Singh for any queries or project discussion which otherwise cost extra 40€.


Pre-requisite:

If you are entering IIoT world, kindly make sure you are good in programming in any of the PLC programming language i.e. Ladder, FBD or SCL. The instructor is using Delta, PLC (Ladder Logic), Siemens S7-1200 (FBD and SCL) and PLCnext as a shop floor controller to get the data from the sensors. This data is further manipulated or analysed using IIoT tools.

PLC Programming is not part of this bundled. If you want to learn PLC Programming, kindly check out this bundle:

Industrial Internet of Things- Teaser


 

Course Preview: Node-RED made Easy

In the below video, you will get the overview about the course and understand the content. Node-RED is an open-source software which has been used to develop this IIoT course bundle.

 

Course Preview: Learn OPC UA with Node-RED


In the below video, you will get the overview about the course and understand the content. OPC UA is a standard communication protocol used in industrial communication between various hardware and software

 

Hi, I’m Rajvir Singh

Founder of Code and Compile


I am working as Development Engineer and International Trainer in Dr.-Ing. Paul Christiani GmbH & Co. KG, Germany. I did my master in Mechatronics, from Siegen University. Prior to that I did advanced Diploma in Mechatronics & Industrial Automation from ISTC, India. I am active content creator in the area of Automation and IIoT on YouTube with +100000 subscribers and growing.

I am the creator of this amazing bundled. Since, 2008 I am involved in creating valuable content in the area of Industrial Automation as a passion. Being a passionate teacher, my core belief is to make learning super easy and fun.

Save 85€ with lifetime access of four certificate courses including 150+ HD video lessons and 1 on 1 LIVE session with the instructor

€119

One-Time Purchase without 1 on 1 Session

Lifetime access

This pricing includes lifetime access to four courses listed in the course description. Contact us at [email protected] if you want alternate payment method.

€139

One-Time Purchase with 1 on 1 Session

Lifetime access

This pricing includes lifetime access to four courses listed in the course description with 1 one 1 LIVE session of 60 minutes with the instructor. Contact us at [email protected] if you want alternate payment method.

Frequently Asked Questions



Can I get a refund if I'm unhappy with my purchase?

If you are unsatisfied with your purchase, reach out to us within next 3 days of enrollment to see if your purchase is eligible for a refund.


When does the course start and finish?

The course starts now and never ends! It is a completely self-paced online course - you decide when you start and when you finish.


How long do I have access to the course?

How does lifetime access sound? After enrolling, you have unlimited access to this course for as long as you like - across any and all devices you own.


Do I get a certificate after course completion?

Yes, as soon as you finished 100% of the course, a downloadable certificate of completion will be issued. As this bundled includes four courses, so you will get four certificates